NRPavs   Oldies  but  Goodies   NAD  3240PE  [3rd unit]  stereo amplifier   details
Oldies but Goodies product details : 
  NAD  3240PE
stereo  amplifier - 3rd unit
SOLD
Back  to  NRPavs Homepage
sitemap
Email  NRPavs
 Goto  product  links :
 All text and images are   © NRPavs  2006 - 2017   All Rights reserved 
   Blu-ray players, mini systems         CD players
Turntables         Tuners
Home  theatre  5.1  receivers         Miscellaneous amplifiers
Stereo amps         Stereo receivers
Speakers  front         rear
  centre           subwoofer
Download current Oldies but Goodies,  and SOLD archives below,  updated after trademe auctions end :

Oldies but Goodies   [0.43MB]       2017 #1  [0.00MB]   2017 #2  [0.00MB]
2016 #1   #2     2015 #1   #2     2014 #1   #2     2013 #1   #2     2012 #1   #2
2011 #1   #2     2010 #1   #2
2009 #1   #2     2008  [1.64MB]
SOLD
Apr 2017
on
trademe
to Wellington
 
 
NAD  3240PE  stereo amplifier  :  front  view
NAD  3240PE  stereo amplifier  :  right  profile
NAD  3240PE  stereo amplifier  :  controls  closeup
NAD  3240PE  stereo amplifier  :  back  view
NAD  3240PE  stereo amplifier  :  left  top  profile
NAD  3240PE  stereo amplifier  :  size  scale
   SOLD April 2017 on trademe  to Wellington
S/N: D324025642
 
 
sitemap                NAD  3240PE  [3rd unit]  stereo  amplifier  specifications                          Back to NRPavs Home  
      NAD  3240PE  [3rd unit]  stereo  amplifier  - charcoal grey :
   According to a long-established industry custom, the highest-quality parts and most highly refined designs are found only in separate audio components - in preamps, power amplifiers, and tuners
   Integrated amplifiers usually are made to a less exalted standard, while all-in-one stereo receivers are regarded as mid-fi products suitable only for first-time buyers
   But not at NAD. Whether you choose the flexibility of separates, the convenience of an integrated amplifier, or the economy of a receiver, all NAD audio components share a single design philosophy
   Often the very same highly-refined circuits are used in both separates and combination products. For example, the NAD 3240PE integrated amplifier contains the best-buy 2240PE power amplifier, combined with preamplifier and control circuits similar to those in the 1240PE preamp
   The 3240PE costs only a little more than other “medium-power” amplifiers, but its no-frills exterior conceals a powerhouse of advanced design
   Its high-current output stage delivers full output to loudspeakers of any impedance (even as low as 2 ohms), producing peak currents up to 25 amperes for precise dynamic control of speaker voice-coil motion
   The 3240PE is conservatively rated to deliver 40 watts of continuous power per channel into either 8 or 4 ohms, but its Power Envelope design yields extraordinary reserves of tone-burst power for music
   With +6 dB of dynamic headroom, the 3240PE delivers over 160 watts per channel at 8 ohms (200watts/ channel at 4 or 2 ohms) for the high-level transient peaks in today’s wide-range recordings
   And the 3240PE puts out 100 watts per channel of clean, clear power for the full 200-millisecond duration of the notes and chords of a grand piano, symphony orchestra, or large jazz band
   The preamplifier section of the 3240PE is based on the 1240PE’s outstandingly quiet, wide-range phono stage
   It features precise RIAA equalisation, very low noise, and ample headroom to accommodate the highest-level peaks without distortion. The dynamic range of the phono preamp circuit exceeds 100 dB
   Bass EQ provides solid, subwoofer-like reinforcement of the low bass, extending the useful response of most loudspeakers an extra half-octave lower
   It strengthens the fundamental tones of pipe organ, bass drum, and synthesizer with no boomy mid bass emphasis. The Bass EQ circuit rolls off sharply below 30Hz to avoid woofer damage and minimise unwanted cone-flapping caused by note-musical signals such as LP disc warps
   NAD’s unusually useful tone controls provide musically effective corrections at very low and high frequencies without altering the amplifier’s fundamentally neutral midrange sound
   Preamp Out and Main In jacks make it easy for you to upgrade your audio system by adding an equaliser, a surround-sound processor, an electronic crossover, or another power amplifier
   NAD amplifiers are praised around the world for their advanced engineering, modest pricing, uncomplicated controls, and state-of-the-art sonic performance
   For accuracy, freedom from noise and distortion, and supremely musical sound quality, the 3240PE is unmatched in value. It has power reserves to drive the finest loudspeakers with ease, and it will do justice to the finest recordings


Specifications, power amplifier :   Continuous power [min RMS per channel 20Hz to 20kHz, less than rated distortion into 8ohms]:
  -:®:-   Vintage : Sept 1988 model
  -:®:-   40W RMS [16dBW]
  -:®:-   Rated distortion [THD, 20Hz to 20kHz] 0.03%
  -:®:-   Clipping Power : 50W
  -:®:-   Dynamic headroom +6dB
  -:®:-   IHF Dynamic Power x 2 at 8 ohms: 160W,   4 ohms 200W,   2ohms 250W
  -:®:-   Damping Factor [8 ohms, 50Hz]: > 50
  -:®:-   Slew Rate > 15V / μsec
  -:®:-   Input impedance : R = 22kohms
  -:®:-   Input sensitivity at rated power : 160mV
  -:®:-   Signal to Noise ratio [1W / 40W, A-weighted]: 86dB / 102dB


Specifications, Preamplifier :
  -:®:-   Phono input : Input impedance [R and C]: MM: 47kohms / 100pF,   MC: 100ohms / 1000pF
  -:®:-   Input sensitivity [1kHz]: MM: 0.55mV [ref 1w out],  3.5mV for rated 40W out
  -:®:-   Signal to noise ratio : MM: 76dB [ref 5mV]
  -:®:-   Total harmonic distortion : < 0.03%
  -:®:-   Phono RIAA accuracy : ±0.5dB
  -:®:-   Line level inputs : Input impedance [R and C]: 15kohms / 100pF
  -:®:-   Input sensitivity [1W]: 26mV
  -:®:-   Maximum input signal : > 10V
  -:®:-   Signal to noise ratio : 86dB for 1W out,  102dB for 40W out
  -:®:-   Frequency response [20Hz to 20kHz] : ±0.5dB
  -:®:-   Line level outputs : Output impedance : Preamp: 600ohm,  tape: source Z + 1kohm
  -:®:-   Tone controls: Treble: ±7dB at 10kHz,  Bass: ±10dB at 50Hz,  Bass EQ: +3dB at 70Hz and +6dB at 40Hz
  -:®:-   Infrasonic filter : -3dB at 12Hz,  12 dB/octave [switchable]
  -:®:-   Low level muting : -20dB


Dimensions :  -:®:-   Dimensions [W x H x D] : 420 x 108 x 380mm     -:®:-   Weight : 6.7kg    packed: ~ 8.2kg

   SOLD April 2017 on trademe  to Wellington



Fastway couriers : packing $5,  Rural add $5,
   each extra 5kg :  add $6.00 NI, $11.80 SI

Auckland @ $7.75 $13

North Island @ $12.35 $18

South Island: < 2kg @ $6.95  NA 

South Island: < 10kg @ $21.25 $27

Payment options :

   CASH on delivery by arrangement : Northland, Auckland buyers

   By  bank payment : 12-3061-0161709-00   ASB   name: N R PARKIN

   By credit card :   Use   Pay Now  option on
trademe     or,
                   Use secure     PayPal  payment on our email money request

ParcelPost :   packing $5,  Rural add $5

1 x < 15kg local not Auckland @ $5.50 $11

8kg to Auckland or Nth Island @ $13.70 $19

8kg to South Island @ $23.20 $28


sitemap


Google
www NRPavs




{{ back to the top        Back to Oldies but Goodies  - stereo  amplifiers


© NRPavs   2006 - 2017    All Rights reserved